Search results for 'blue laser'
-
$14,000.00RGB60W Laser Stage Laser High-Power Color Laser Module
-
$4,335.00RGB30W Laser Color Light Laser Stage Laser Module High-Power Laser Module
-
$350.00Mixed RGB White Laser
-
$935.00RGB Mixed White Laser
-
$7.00 -
$121.991W Fat Beam Green Laser Diode Diode Laser Module Stage Lighting Effect with Fan -
$475.00Laser Diode 450nm 4.75*8W 38W numb08 bank extracted from laser projector. -
$109.993W White Light Laser Diode Module Laser Head light White Lighting Effect RGB Light Combining W3000-B TTL
-
$249.00Out of stock
-
$110.00450nm 5.5w Engraving Marking Engraver/Marker for wood/plastic/stainless steel
-
$375.00
Specification
Wavelength: 905nm
Output: 25w
It is IR laser,the laser light cannot be seen by human bare eyes with only using DDC/infrared camera get it.
-
$540.00Features
1. Stage Lighting
2. PM2.5 PM10 testing
Instructions for use:
1 Connect the power plug before turning on the switch. Power is applied for 10 minutes into a stable state. Switching power supply interval should be greater than 5 seconds, or easily damaged lasers.
2 power panels should be placed on an insulator or overhead when using, otherwise it will bake a bad laser power. At the same time, and not let the laser power cables suffered at great force, so as to avoid the laser internal wiring circuit.
3 This laser is normally used on stage lighting shows, so that the heatsink by itself is not suitable for 7/24 working.
4 Please note that the use of dust, the dust can not be used in place much, if not a long time in the laser light hole stickers affixed dust. 5 This laser has a switch to adjust from TTL to analog.
-
$57.98 As low as: $30.00more details pls check the datasheet in the tital picture
original packaged with newly data
-
$490.00Features This Laserland RGB laser is normally used on mini stage lighting for Halloween, Christmas. This Laserland RGB white laser can be used in escape room lighting effect. one laser can be used for 6 colors for lighting shows. This laserland RGB white laser can be used in KTY and DJ bars for Parties or Bars. Hunted House use for Fun Instructions for use: 1 Connect the power plug before turning on the switch. Power is applied for 10 minutes into a stable state. Switching power supply interval should be greater than 5 seconds, or easily damaged lasers. 2 power panels should be placed on an insulator or overhead when using, otherwise it will bake a bad laser power. At the same time, and not let the laser power cables suffered at great force, so as to avoid the laser internal wiring circuit. 3 This laser is normally used on stage lighting shows, so that the heatsink by itself is not suitable for 7/24 working. 4 Please note that the use of dust, the dust can not be used in place much, if not a long time in the laser light hole stickers affixed dust. 5 This laser has a switch to adjust from TTL to analog. -
$13.50 As low as: $11.00 -
$70.00Can engrave:
Wood, plastic, paper, leather
Can cut:
Paper, thin leather, thin wood plate
Cannot engrave:
Metal, glass, stone, etc
Note: the adapter only have US, EU standard. it is bonus for free. if it is not suitable, pls find a suitable one in your supermarket.
