Search results for 'red laser'
-
$6.98Out of stock
DIY Laser Alarm Kit Security System Anti-Theft Infrared Laser Line Science Experiment Invention Electronic Production -
$6,500.00RGB40W Laser with Color Light High-Power Laser Module
-
$350.00Mixed RGB White Laser
-
$110.00450nm 5.5w Engraving Marking Engraver/Marker for wood/plastic/stainless steel
-
$11.88Blue/Violet Blu-Ray 405nm 10mW Laser/Lazer Diode Module -
$540.00Features
1. Stage Lighting
2. PM2.5 PM10 testing
Instructions for use:
1 Connect the power plug before turning on the switch. Power is applied for 10 minutes into a stable state. Switching power supply interval should be greater than 5 seconds, or easily damaged lasers.
2 power panels should be placed on an insulator or overhead when using, otherwise it will bake a bad laser power. At the same time, and not let the laser power cables suffered at great force, so as to avoid the laser internal wiring circuit.
3 This laser is normally used on stage lighting shows, so that the heatsink by itself is not suitable for 7/24 working.
4 Please note that the use of dust, the dust can not be used in place much, if not a long time in the laser light hole stickers affixed dust. 5 This laser has a switch to adjust from TTL to analog.
-
$38.00Usage:
-
Stage lighting shows
-
Scare birds and animals
-
Laser curtain
-
Laser harp
-
Laser wine bar base
-
Escape room
-
Amusement park
-
Pleasure groud and squares
-
Holiday lighting effect
-
PM 2.5 PM 10 dust/humid testing
-
-
$11.00Sony SLD3234VF 5.6mm 405nm 80mW Laser Diode -
$7.5012mm 405nm 20mW 50mW Dot Laser Module Focusable 5V -
-
-
$36.78 As low as: $33.60Out of stock
532nm 50mw big fat beam Green Laser Diode Module TTL 12V light show -
$39.00 As low as: $35.10Usage:
-
Stage lighting shows
-
Scare birds and animals
-
Laser curtain
-
Laser harp
-
Laser wine bar base
-
Escape room
-
Amusement park
-
Pleasure groud and squares
-
Holiday lighting effect
-
PM 2.5 PM 10 dust/humid testing
- Spinning machine location
-
-
$13.78Focusable 150mW 650nm 655nm 660nm Red Laser Module Diode with 12V TTL -
$70.00Out of stock
Can engrave:
Wood, plastic, paper, leather
Can cut:
Paper, thin leather, thin wood plate
Cannot engrave:
Metal, glass, stone, etc
Note: the adapter only have US, EU standard. it is bonus for free. if it is not suitable, pls find a suitable one in your supermarket.
-
$90.00Can engrave:
Wood, plastic, paper, leather
Can cut:
Paper, thin leather, thin wood plate
Cannot engrave:
Metal, glass, stone, etc
Note: the adapter only have US, EU standard. it is bonus for free. if it is not suitable, pls find a suitable one in your supermarket.
Specification
1. when you adjust the beam diameter at 20-200mm, the beam is 0.3-0.5mm. it can be used as cutting, engraving or marking on wood, paper, leather and plastic.
2. when you adjust the laser beam for fatter, it can be used as stage lighting.
3. when you use the pwm, the pulse output is 1.25w, it is suitable for engraving, marking or cutting.
4. when you use it as cw output, it is 1-1.05w output.
5. we had updated the fan cooling system on the housing which helps the laser get better heatsink effect and protect the laser longer duty cycle.
6. it is very bright so that when we use it on stage lighting, it get very good effect
