Search results for 'red laser'
-
$45.00This Laserland RGB laser is normally used on mini stage lighting for Halloween, Christmas.
This Laserland RGB white laser can be used in escape room lighting effect.
One laser can be used for 6 colors for lighting shows.
This laserland RGB white laser can be used in KTY and DJ bars for Parties or Bars.
Hunted House use for Fun
-
$2,400.00function
1. stage lighting
2. Lab Use
3. long distance target
4. long distance pm2.5 pm10 testing
5. atmospheric environmental monitoring -
$43.48445nm 450nm 3.5W 3500mW Blue Laser Diode LD NDB7A75 cut-pin -
$110.38 As low as: $100.00C-mount Package High Power 1000mW 1W 1470nm Infrared IR Laser Diode LD FAC -
$105.78Out of stock
3380 980nm 0.8W Infrared Dot Laser Module with TTL -
$229.06Out of stock
10W 808nm Laser Diode F-mount with FAC lens -
$22.98LAB-use no pd 9.0mm 1W 808nm/810nm IR Infrared Laser Diode LD TO5 -
$159.98Out of stock
NEW NICHIA 520nm Green Laser Diode LD 1w/1000mW 9mm -
-
$90.00Can engrave:
Wood, plastic, paper, leather
Can cut:
Paper, thin leather, thin wood plate
Cannot engrave:
Metal, glass, stone, etc
Note: the adapter only have US, EU standard. it is bonus for free. if it is not suitable, pls find a suitable one in your supermarket.
Specification
1. when you adjust the beam diameter at 20-200mm, the beam is 0.3-0.5mm. it can be used as cutting, engraving or marking on wood, paper, leather and plastic.
2. when you adjust the laser beam for fatter, it can be used as stage lighting.
3. when you use the pwm, the pulse output is 1.25w, it is suitable for engraving, marking or cutting.
4. when you use it as cw output, it is 1-1.05w output.
5. we had updated the fan cooling system on the housing which helps the laser get better heatsink effect and protect the laser longer duty cycle.
6. it is very bright so that when we use it on stage lighting, it get very good effect
-
$70.00Out of stock
Can engrave:
Wood, plastic, paper, leather
Can cut:
Paper, thin leather, thin wood plate
Cannot engrave:
Metal, glass, stone, etc
Note: the adapter only have US, EU standard. it is bonus for free. if it is not suitable, pls find a suitable one in your supermarket.
-
$8.98 -
-
$69.98 As low as: $62.98Out of stock
9.0mm TO-5 Nichia NDB7675 462nm 1.4W Blue Laser LD Diode Brand New -
$57.98 As low as: $30.00more details pls check the datasheet in the tital picture
original packaged with newly data
-
$540.00Features
1. Stage Lighting
2. PM2.5 PM10 testing
Instructions for use:
1 Connect the power plug before turning on the switch. Power is applied for 10 minutes into a stable state. Switching power supply interval should be greater than 5 seconds, or easily damaged lasers.
2 power panels should be placed on an insulator or overhead when using, otherwise it will bake a bad laser power. At the same time, and not let the laser power cables suffered at great force, so as to avoid the laser internal wiring circuit.
3 This laser is normally used on stage lighting shows, so that the heatsink by itself is not suitable for 7/24 working.
4 Please note that the use of dust, the dust can not be used in place much, if not a long time in the laser light hole stickers affixed dust. 5 This laser has a switch to adjust from TTL to analog.
