X3-SLH Microscope Slide Fixture Display Clip Fixing Fixture Pressing Sheet Optical Chemistry Experiment Base Platform Research

Product information

Product name :Microscope slide fixture

Model :X3-SLH

Specification :101.6*68.6*18.4mm

Countersunk hole: M3/ M6 groove(29.7*13.1mm)

Material : 7075 aluminum alloy

Weight :102.1g

Characteristic

►It is very suitable for installing rectangular optical elements such as microscope slides or test targets

► Accept slides with a width greater than 44mm;

►Compatible culture dish diameter: 37.1mm to 41.4mm;

►The adapter can be directly installed on the M3 counterbore flexure platform, and any platform with M6 threads with a center spacing of 50.8mm;

Description

(1) The slide holder is compatible with microscope slides or test targets, compatible petri dishes with diameters: 37.1mm to 41.4mm, and other rectangular optical elements with a width of 44mm. Allows to install petri dishes and glass slides on the motion control stage to be integrated into custom microscope devices such as optical tweezers.

(2) Two sets of mounting holes provide multiple uses. A set of four M3 counterbore holes and a set of M6 grooves with an interval of 50.8mm are designed to install many other components, such as Nano X3 series flexure stage or Oeabt multiple displacement stages.

(3) The spring clamp of the slide glass can be rotated to facilitate the replacement of the petri dish and glass slide. They come with two M4 shoulder screws and a 2.5mm hex socket for connecting to various stages. The spring clip is 63.7mm long and has a 5.1mm wide tip that can be rotated 360 degrees to reach or position the slide. The end of the spring clip is bent upward to prevent damage to the glass slide and provide enough holding force to hold it in place.

Measurement error: Please allow a small measurement error.