Product name :Microscope slide holder
Thread type : M4
Material :316 stainless steel
►A pair of spring clips hold the sample in place;
►Suitable for microscope slides and test targets of various sizes;
►Use M4 threaded holes to directly connect to any stage;
►Multifunctional installation and configuration;
(1) These stainless steel spring clamps are ideal for holding various sizes of microscope slides and test targets stably. They come with two M4 shoulder screws and a 2.5mm inner hexagon, which can be connected to displacement through M4 threaded holes On stage.
(2) The spring clip is 63.7mm long and has a 5.1mm wide tip, which can be rotated 360 degrees to reach or position the slide. The end of the spring clip is bent upward to prevent damage to the glass slide and provide enough holding force to hold it in place.
Measurement error: Please allow a small measurement error.
- Additional Information