►±2.5° pitch and yaw adjustment function;
►It can realize repeatable and precise positioning of various cylindrical components;
►The clamping diameter range is 30-35mm;
►Motion positioning point;
►Pockels box adjustment frame;
(1) TAL-PCH tilt adjustment frame is used to clamp Ø30-Ø35mm cylindrical components, such as Pockels box. The adjusting frame is composed of the main body of the adjusting frame and the detachable clamping block. After the assembly is clamped, the position can be fixed by tightening the screw above the clamping block.
(2) For cylindrical components with a diameter of less than 35mm, you can use the attached two sponge rubber pads, first stick to the bottom of the pressure block and then clamp the fixed component.
(3) The yaw azimuth and pitch angle of the adjustment frame can respectively provide ±2.5° pitch and yaw adjustment functions. Use a 3mm hexagon wrench to adjust the side "ELEV" and "AZIMUTH" to control the angle alignment, the front panel and the side panel Both are laser engraved with three auxiliary lines as angle tilt marks.
(4) There are 4 countersunk holes at the bottom, which can be fixed to the optical table or breadboard with OPS-M406 adapter plate.
Measurement error: Please allow a small measurement error.
- Additional Information