►4-40 thread at one end and M3 thread at the other end;
►The PCM-S series support rod of Ø6mm can be inserted inside;
►Connect the Ø6mm cage rod at 90°;
►Multiple 30mm and 60mm cage structures can be connected vertically;
►Precision processing of stainless steel, high flexibility of building blocks, high applicability of alignment;
(1) The cage rod cross coupling can connect multiple 30 mm and 60 mm cage structures vertically at 90°. The building block is highly flexible, can simplify the alignment steps, and facilitate the installation and integration of the cage system.
(2) There is a Ø6mm limit hole inside, the upper and lower ends, one end has a 4-40 screw hole, and the other end has an M3 screw hole. The PCM-S series cage rod can be inserted into the hole and fixed with a 1.5mm hexagon wrench, or it can be screwed directly into the screw hole.
(3) One end of the M3 thread can be directly connected to the OPS-M2 universal base plate, and a 30 mm cage system component is installed vertically on it, which provides a multi-threaded mounting hole array to install components in various directions, which increases the flexibility of the optical device.
Measurement error: Please allow a small measurement error.
- Additional Information