PFR-A30 cage steering plate 30mm cage coaxial system orthogonal 90° conversion plate cage plate optical research experiment

Product information

Model:PFR-A30
Product name:30mm cage steering plate
Specification:50.8*44.2*20.6mm
Center aperture:SM1 (1.035"-40) internal thread
Blind hole diameter:Ø6mm, spacing: 30*30mm
weight:44.7g
Material:7075 aluminum alloy

Characteristic

►Install two 30mm cage system components at 90°;
►SM1 (1.035"-40) internal thread, used to install optical elements or lens tubes;
►Compatible with 30mm cage system;
►Flexible clamping design, good stability and more convenient movement;
►Ø6mm through hole, compatible with PCM-S series poles;

Description

(1) The cage steering plate can install one cage system vertically on another cage system at 90°. Each orthogonal steering plate contains mounting holes for the installation of cage rods.

(2) There are 4 Ø6mm holes with a depth of 9mm in the front of the steering plate, which are used for PCM-S series cage rods. Each cage rod is fixed in the steering plate by a hexagonal set screw on the side. Orthogonal PCM-S series cage rods are fixed in the flexible clamps on the side of the steering plate and can be tightened by cap screws. All cage rods can be fixed with a hexagon wrench or balldriver.

(3) The center hole of the steering plate is an SM1 (1.035"-40) screw hole, which is used to install SM1 lens tubes or Ø1" optical components with a maximum thickness of 6.1mm (the snap ring needs to be purchased separately, the model is CSK3).

Measurement error: Please allow a small measurement error.