T-XYR-D Series Double Two Axis Linear Displacement Table XY Axis Translation Table R Axis Turntable Manual Fine Tuning Optical

Product information

Characteristic

CT-XYR-D characteristics:

► Double axis rotary displacement table, with rotary platform and removable non perforated roof;

► 360 ° continuous rotation;

► Linear travel of 13mm along the X and Y axes;

► With SM1 (1.035 "- 40) threaded center hole, with 2 CSK3 snap rings;

► The height from the bottom to the installation plane is 25.4mm, and the height to the top plate without holes is 32.2mm;

► The attached locating pin is used to align the standard glass slide on the through hole of the platform;

ST-XYR-D characteristics:

► Two axis linear displacement table with square thread platform;

► Linear travel of 13mm along the X and Y axes;

► With SM1 (1.035 "- 40) threaded center hole, with 2 CSK3 snap rings;

► The height from the bottom to the installation plane is 25.4mm;

► The attached locating pin is used to align the standard glass slide on the through hole of the platform;

Optical commonly used thread size standard

This is the unique thread of Thorlabs in the United States, not the commonly used optical thread. SM is the code for the thread of the sewing machine in terms of thread expression, but this company in the United States uses it to connect the internal and external threads of the optical lens and the sleeve. The nature of the thread is UNS, and the United States has a special thread with a tolerance accuracy of 2A / 2B. The special place of this thread is 40 teeth per inch regardless of the diameter.

The specific dimensions are as follows:

Description

 (1) The T-XYR-D series two axis displacement table provides 13mm travel along the X axis and Y axis micrometer heads, and the indexing is 10 µ m. And there is a SM1 threaded (1.035 "- 40) threaded hole in the center, which is very suitable for imaging applications requiring illumination from the bottom of the sample. With X-SLH microscope slide holder, it is designed to hold microscope slides and test targets of various sizes. (The attached 3 locating pins are used to facilitate the operation or positioning of the slide.)The movement of the displacement table in the X and Y axes will not affect the central threaded hole. The displacement table is fixed by the spring on the driver, so no locking screw is required.

(2) The size of the rotary table top of the CT-XYR-D displacement table is 106.1mm. The 360 ° continuous angle scale at the outer edge is convenient for users to set the angle direction of the displacement table, with a division of 2 °. The rotating position can be locked with 2mm hexagon locking screws at the "LOCK" position. Locking the rotation axis does not prevent translation along the X and Y axes.

(3) There is also a series of M6 and M4 threaded hole arrays on the displacement table for installing samples and components. At the same time, a conversion plate is attached to convert the threaded hole surface into a plane, which is convenient for users to convert the threaded hole surface of the displacement table into a flat surface.

(4) ST-XYR-D displacement table square table size is 108.0 * 108.0mm. In addition to SM1 threaded through-hole, there are a series of M6, M4 and 4-40 threaded hole arrays on the displacement table to install samples and components. Eight 4-40 threaded holes around the center screw hole are used for our 30mm or 60mm cage

system integration.