AD Fiber Coupling FC/PC/APC/SMA Adapter Single Multimode AD Series Fiber Sleeve Bracket Connector

Characteristic

AD-PC Series
Features:

►2.4mm wide keyway matching sleeve;

► Optical fiber for FC/PC connector;

►Insertion loss < 0.2dB (main line type: PC, R20μm; LD light source,
measured at a wavelength of 1.31μm);

►Single-hole, double-hole and four-hole brackets are available;

AD-APC Series
Features:

►2.15mm narrow keyway matching sleeve;

►Fiber for FC/APC connectors;

►Insertion loss <0.2dB (main line type: APC; LD light source,
measured at a wavelength of 1.31μm);

►Single-hole, double-hole and four-hole brackets are available;

AD-SMA Series
Features:

►SMA905 adapter, ferrule size Ø3.2mm;

► Optical fiber for SMA-SMA connector;

►Insertion loss＜0.3dB(Max);

►Single-hole, double-hole and four-hole brackets are available;

Description

(1) The Oeabt series of mating sleeves provide good alignment to the fiber core at the end of the attached fiber and minimize back reflections through optical contact (except for SMA interface sleeves, which are air-spaced). AD series optical fiber matching sleeve can be well aligned with the fiber core at the end of the connected fiber, with good repeatability, large return loss and low insertion loss.

(2) The alignment sensitivity of flat FC/PC connectors is significantly lower than that of angled FC/APC connectors, so AD-PC series wide keyway matching sleeves can be used for narrow and wide key FC/PC connectors. The AD-APC series of narrow keyway sleeves align well with angled narrow key FC/APC connectors.

(3) A rubber cap is attached at both ends of the AD-PC series and AD-APC series matching sleeve interface, which can play a dustproof and protective role when the matching sleeve is not used.

(4) The SMA fiber optic sleeve frame adopts an air gap structure, and each SMA-SMA connector of the bracket contains a metal sleeve for connecting the SMA905 type connector. The concentricity of the butt-jointed two fibers can be within 0.005mm. The attached metal cap is used for the end, which can play a dustproof and
protective role when not in use.

(5) Single-hole, double-hole, and four-hole integrated brackets are provided. The L-shaped fixing bracket contains 1 or 2 through holes. It is easy to install it to a
post, optical table or bread using the included M6 column screws. board.