- Description
-
Details
Product information
OHD series
No Countersunk Hole Type
Model
OHD3030
OHD3060
OHD3090
OHD4060
OHD4080
OHD6060
Diameter
300*300*14mm
300*600*14mm
300*900*14mm
400*600*14mm
400*800*14mm
600*600*14mm
Net weight
3.30kg
6.60kg
9.90kg
8.80kg
11.73kg
13.50kg
Thickness
14mm
Hole pitch
25*25mm
Margin
25mm
Thread Type
M6
Material
#7075Aluminum
alloyOHD-A series
Countersunk Hole Type
Model
OHD3030-A
OHD3060-A
OHD3090-A
OHD4060-A
OHD4080-A
OHD6060-A
OHD6090-A
Diameter
300*300*14mm
300*600*14mm
300*900*14mm
400*600*14mm
400*800*14mm
600*600*14mm
600*900*14mm
Net weight
3.30kg
6.60kg
9.90kg
8.80kg
11.73kg
13.50kg
19.80kg
Number of countersinks
4 Pcs
5 Pcs
5 Pcs
5 Pcs
5 Pcs
5 Pcs
5 Pcs
Thickness
14mm
Hole pitch
25*25mm
Margin
12.5mm
Thread Type
M6
Material
#7075Aluminum
alloyCharacteristic
►Breadboard size: length * width * thickness (unit: mm);
►Threaded holes: All breadboards have M6 threaded holes, and the hole spacing is 25mm;
►Two series: OHD series M6 threaded hole array, no countersunk holes; OHD-A series M6 threaded hole array, M6 countersunk holes;
►The surface is blackened by anodic oxidation, which greatly reduces surface reflection;
Description
These solid aluminum, non-magnetic aluminum breadboards are a convenient and cost-effective platform for assembling prototypes of optical devices, conducting experiments, and installing small systems. The surface of the breadboard is oxidized and blackened to reduce surface reflection to a large extent, and there is a standard 25mm*25mm threaded hole array, and the distance from the edge of the breadboard is 25mm or 12.5mm respectively. Threaded holes penetrate through the breadboard to facilitate the installation of components from any side, and facilitate the construction of various optical components, displacement seats, etc., and various interference systems.
OHD series standard M6 threaded holes, the array hole spacing is 25*25mm, and the distance from each side edge is 25mm.
The OHD-A series breadboard has four or five mounting holes that are offset and staggered with the M6 threaded hole array, so that it will not affect the mounting surface of the intended application. The four standard mounting holes are located at the four corners of the breadboard, 12.5mm from the edges of each side. The larger breadboard also has a fifth countersunk mounting hole in the center. The central mounting hole can reduce the stress of the edge mounting hole and increase rigidity when installing heavy loads.The bracket post (Model: CF50-S) uses a Ø25mm stainless steel column to match the height, allowing the breadboard to be installed above the working surface of the optical table (or breadboard), which is easy to move, and has the effect of shock isolation, balance and stability.
Optional breadboard handles are provided to facilitate lifting and transporting the optical breadboard. Each handle has two mounting holes, which are installed on the working surface of the screw holes with standard M6 cap screws.
Measurement error: Please allow a small measurement error.
- Additional Information
-
Additional Information
SKU OHD - Reviews
-