- Description
-
Details
OF-20B series fiber laser module fiber laser coupled with SMA interface core 5/10/20/30mW
Note:
The fiber laser module must be used with the PWM dimming controller in order to operate normally. Buy the fiber laser module separately, it cannot be used.
Product information
The output wavelength range of fiber-coupled laser is between 400nm~850nm, and it has small size, light weight, high detection resolution, high sensitivity, wide temperature measurement range, good confidentiality, strong anti-electromagnetic interference ability, strong corrosion resistance, etc. obvious advantage. It can be applied to various fields such as optical data storage, optical signal communication, sensing technology, spectroscopy and medical applications.
Characteristic
Fiber
coupled laser modulecharacteristics:▶The output wavelength range is 400nm~850nm, and different wavelength power can be customized;
▶Intelligent feedback control circuit and efficient transmittance optical system;
▶Low power consumption, high efficiency light, stable power output performance, good consistency and long service life;
▶SMA connector, with 1 meter fiber jumper, can make the laser light-emitting end move flexibly and freely;
▶With PWM dimming controller, it supports PWM mode light intensity adjustment of three-channel laser light source;
Fiber coupled laser moduleparameter:
Model
Output Wavelength(nm)
Output Power(mW)
OF-20B-405-(5-30)-G
405
5/10/30mW
OF-20B-447-(5-30)-G
447
5/10/30mW
OF-20B-450-(5-30)-G
450
5/10/30mW
OF-20B-505-(5-20)-G
505
5/10/20mW
OF-20B-510-(5-20)-G
510
5/10/20mW
OF-20B-515-(5-20)-G
515
5/10/20mW
OF-20B-520-(5-20)-G
520
5/10/20mW
OF-20B-635-(5-10)-G
635
5-10mW
OF-20B-658-(5-30)-G
648
5/10/20/30mW
OF-20B-660-(5-30)-G
660
5/10/20/30mW
OF-20B-785-(5-30)-G
785
5/10/20/30mW
OF-20B-808-(5-30)-G
808
5/10/30mW
OF-20B-830-(5-30)-G
830
5/10/20/30mW
OF-20B-850-(5-30)-G
850
5/10/20/30mW
Shell Size
20mm*59mm
(Adjustable
focus)Shell Material
Environmental
protection aluminum partsFiber material
Plastic
Fiber length
1m
Connector type
SMA interface
Multimode coupling rate
>90%
Spot shape
Speckle
Operating Voltage
DC 12V
Circuit control mode
PWM control
panelControllable frequency
0-5Hz
Operating temperature
-10℃~+60℃
Weight
56.6g
Laser
light source PWM dimming controller controller:▶Adopt PWM pulse width modulation method to steplessly adjust the intensity of laser light source;
▶Support PWM mode light intensity adjustment of three-channel laser light source at the same time;
▶Small size, support quick assembly with OP-20B series fiber laser module;
▶LCD display frequency and duty cycle, intuitive and easy to understand;
▶PWM frequency and duty cycle can be set separately;
▶Using the single-button jog dial for menu operation, simple and fast;
▶Wide frequency range and high precision;
Laser
light source PWM dimming controllerparameter:Product
numberLaser-DRV-3C
Input
voltageDC12V
The
output voltageDC12V
Number
of channels3
(can be used at the same time)Frequency
Range1-150KHz
(Stroboscopic
visible below 60Hz)Frequency
accuracy±2
PWM
signal load5-30mA
Duty
cycle adjustment range0-100%
Duty
cycle adjustment step1%
Save
adjustment parametersAutomatic
save (not lost after power failure)Output
amplitudeThe
PWM amplitude is equal to the input voltageWorking
temperature-20~70℃
Volume
76x74x47mm
(without knob height)Weight
174.8g
Description
(1)The lasers are all high-quality original and imported laser diodes, equipped with high-performance PWM drive circuits and optical coatings Composition of glass lens group. In addition, the laser is designed with a strip heat sink, which has better heat dissipation performance, which can reduce the temperature by 10% to 15%, and quickly cool the diode. It has the characteristics of high reliability, high stability, strong anti interference, good consistency and long service life.
(2) The laser port is an SMA connector. Because of its flexibility, the fiber jumper can make the laser light-emitting end move flexibly and freely, making the laser more convenient to use;
(3)The laser module is used with a PWM controller, and the laser module is used with a PWM controller. The control panel can be connected to 3 laser modules. Connect to the power supply to start the controller by itself and enter the operation interface. Press the top of the knob to switch the laser module to be controlled, and the left and right knobs can adjust the brightness of the associated modules.
Measurement error: Please allow a small measurement error.
- Additional Information
-
Additional Information
SKU OF-20B - Reviews
-