MPV-76K2 V-type Clamping Block Optical Experiment Holder Laser Mounting Seat V-type Clamping Block Optical Experiment

Product information

Model:MPV-76
Product name:V-shaped block
Specification:76*63*20mm
Material:#7075 Aluminum alloy
Net weight:217g
--------------------------------------
Model:PRK2-A65
Product name:Pressure arm
Specification:65*98*54mm
Material:#7075 Aluminum alloy
Net weight:36g

                                                                                         Characteristic

▶ Can compact cylindrical objects from Ø 0.26 inches (6.6mm) to Ø 2.04 inches (51.8mm);

▶ The pressure arm can be installed through three 8-32 (M4) tap holes, and the pressure arm provides stable 3 point contact with the V-shaped pressure block;

▶ Two Ø 1/4 inch (M6) countersinks, the middle M4 countersink is used for installation and fixing;

▶ Can be mounted on Ø 1 inch or Ø 1/2 inch stainless steel posts;

▶ A PRK2-A65 pressure arm is attached to each mount.

Instructions

The V-shaped clamp with a length of 76mm is designed to support large cylindrical objects, such as relatively large diameter ammonia neon lasers. The cylindrical objects are tightened by the nylon head locking screws on the included PRK2-A65 pressure arm. The locking screw can be tightened with a 5/64 inch (2mm) ball driver or a hexagon socket. Three 8-32 (M4) threaded holes on the bottom and four Ø 1/4 "(M6) countersinks are provided for installation. (Each mounting base contains 1 pressure arm, which requires more pressure arms can be purchased separately.

A ▶Can be clamped by double pressure arm, can achieve excellent stability effect;

B ▶Can be installed on TAL-XY60 pitch and deflection platform and 1-inch cylindrical post;

C ▶Can hold and squeeze 12mm diameter laser light source;

D ▶Can hold and compact the lens sleeve (outer diameter 30.5mm and inner diameter 26mm);

E ▶Two Ø1/4-inch (M6) countersinks, middle M4 countersinks for mounting;

• Measurement error: Please allow a small measurement error.