Product name : MCT-LM
Specification : 180.9*80.4*50.0mm
Lifting stroke : 38mm
Thread type : 2 M6 threaded holes, 4 Ø4.4mm countersunk holes
Weight : 465.6g
Material : 7075 aluminum alloy + 304 stainless steel
▶Realize the lifting adjustment of the microscope head;
▶Focus handwheel can control the adjustment speed for fast or high precision movement;
▶Linear lift stroke 38mm;
▶The maximum load supporting the vertical direction is 1kg;
▶ Offers a variety of pre-installation options;
1. The microscope focusing slide uses a steel ball guide rail type rack focusing mechanism, and one end of the handwheel can move about 38mm in a coarse focusing stroke. The copper alloy dovetail guide rail with good wear resistance is used for precision guidance. Through the eccentric adjustment of the gear rod sleeve, the meshing degree of the gear and the rack is promoted, so as to make the movement smooth and eliminate the idling; the other end of the handwheel is adjusted for damping to keep the focus position unnaturally sliding. The maximum load supported in the vertical direction is 1kg.
2. The front and rear panels can be connected to a Ø1.5" post or a 66mm bracket with different adapter blocks; a variety of pre-installed installation options are available:
Front panels with different mounting methods can be used to install cage systems or other experimental devices.
- Additional Information