▶Connect two 30mm cage cubes side by side;
▶Compatible with 30mm cage system;
▶The center hole isØ26.3mm, compatible with the transmission light aperture required by 30mm cage system components;
▶With 4 4-40 column head threads, 2 4-40 flat head screws;
(1) The M2-CX series are cage cube connectors, which can quickly connect our 30mm cage cubes together. The laminated design can be directly connected with any cage cube, providing flexibility for assembling complex optomechanics. ([Alignment pin] Please note that because the connector has an alignment pin, please align the hole next to the SM1 threaded hole on the surface of the cube for connection.)
(2) For the installation of the connectors, the attached screws can be used to connect the stacked cubes. In addition, the connecting pieces loaded on the cube do not affect the connection and installation of the cage rods. The cage rod and the cube connector can be directly fixed to the cube 4-40 threaded holes.
(3) With screws:
Two 4-40 flat head screws: install to the two groove holes on the inner surface of the connector, and connect
with the cube;
Four 4-40 stud head screws: install to the four countersunk holes on the side, and lock the connection with
Measurement error: Please allow a small measurement error.
- Additional Information