LB-A3 Tilt Adjustment Mount Frame Adjustable Angle Frame Optical Prism Holder Experiment Research

Product information

Product name :Tilt Adjustment Mount
Model : LB-A3
Specification : Ø50.3*17.0mm
Thread type : 5 places M3, 5 places M4
Adjustment range : ±4° pitch adjustment
Weight : 75.8g
Material : 7075 aluminum alloy

Characteristic

►For ±4° pitch adjustment;

►Using the pressure arm/optical element mount is extremely suitable for prism/rectangular/circular light elements;

►Multi-threaded array of countertops;

►The bottom M4 screw hole can be connected to the post for free space construction; 

1. There are three adjusters on the back of the LB-A3 tilt adjustment mount, which can provide pitch adjustment and achieve ±4° pitch adjustment.

2.  The table has 5 M3 screw holes and 4 M6 screw holes, which can be matched with a pressing arm or an optical component mounting seat to clamp and install rectangular, square or circular optical components on the adjustment frame. PRK3-A30 press arm can hold prisms up to 25.4mm. The LFM1-A rectangular filter holder can install filters with a thickness of less than 3mm and a width of 28-40mm. The LFM1-B, on the other hand, accepts Ø1" optics up to 6.2mm thick. 

3.   There is an M4 screw hole at the bottom of the platform, which allows direct mounting to our Ø12mm post.

Measurement error: Please allow a small measurement error.