Kcd1l-m Right Angle Optical Adjustment Cage System Right Angle Adapter 90 Degree Mirror Mount Optical Experiment Research

Product information

Kcd1l right angle adjusting frame is easy to be designed into our 30 mm cage system. The input and output ports of the adjusting frame have a SM1 screw hole, which can integrate a 1-inch transparent sleeve.

Characteristic

▶ bogie adjustment frame for 1-inch round, elliptical or parabolic optical elements

▶ compatible with 30 mm cage system and SM1 (1.035 "- 40)

▶ eight smooth holes 0.25 inch (6.35 mm) deep for mounting the M6 cage rod

▶ install Ø 1 inch (25.4 mm) optical elements at an angle of 45 ° with respect to the optical axis

▶ one M4 screw hole and one M6 screw hole for Ø 1 / 2 inch

▶ provide pitch and deflection tilt adjustment of ± 4 °

The kcd1l-m right angle adjusting frame is compatible with φ 1 inch (25.4mm) optical elements, providing the maximum luminous aperture for any projection light, and providing space for the operation of installed optical elements. The back rotation design does not limit the thickness of the optical elements to be installed. Even if the cage rod or lens sleeve is installed on the mounting base, the installed optical elements can still be operated.

A:One M4 screw hole and one M6 screw hole (for φ 1 / 2 inch and φ 1 inch extension rods)Install the optics at an angle of 45 ° in the horizontal position to provide adjustable pitch and tilt. The port has four M4 holes and their spacing matches our 30mm cage system standard. This design allows multiple 30mm cage components to be directly connected without the need for cage bar adapters.

B:The diameter (25.4mm) SM1 threaded hole is compatible with the installation of 1-inch sleeve.

Measurement error: Please allow a small measurement error.