FWO-A2 Light Filter Tools Manual Roller 12 Piece Mounting Base Double Wheel Cage System Optical Experiment

Product information

Model: FWO-A2

Product Name: Two wheel filter wheel

Hole diameter: SM1 internal thread compatible hole position

Number of holes: 12, with csk3 snap ring

Specification: 92 x 96 mm

Operation mode: Manual clockwise and anti clockwise rotation

Material: # 7075 aluminum alloy

Net weight: 256g

Characteristic

▶FWO-A2: double wheel, 12 filters can be installed;

▶ SM1 internal thread hole (1.035 "- 40), used for the installation of 1-inch or Ø 25mm filter with the thickest 4mm (0.15 inch); SM1 card is provided;

▶ luminous aperture: Ø0.90 inch (23mm);

▶ it can rotate the wheel repeatedly and transform the filter; 1-6 numbers are engraved on the edge of the mirror hole, which is convenient for marking and confirmation;

FWO-A2 filter wheel can be installed with 12 Ø1 inch or Ø25mm filters and can rotate independently. The filter is held in place with an attached snap ring. The luminous aperture is φ 0.90 inch, and each filter port adopts standard SM1 (1.035 '- 40) thread, so that the filter wheel is compatible with other SM thread components.

Installation method:

To install the filter in the filter runner hole, first remove the attached SM1 thread from the mounting hole, and then place the filter in the threaded hole to lean against the back convex edge of the hole, and finally lock the filter in place with the stuck filter.

If it is necessary to install a filter with a thickness of 4mm on the filter wheel, just remove the SM1 thread snap ring from the mounting hole, put the filter into the thread hole, close to the back positioning surface, and then use the snap ring to clamp the filter. For filters with a thickness of more than 4mm, such as band-pass and laser line filters, edge pass filters or fluorescent filters, remove the snap ring first, and screw the Ø1 inch lens sleeve into the filter wheel mounting hole. Then, install the filter into the lens sleeve.

The base is provided with M6 threaded hole to install the extension support; Ø6mm countersunk head groove, 19mm displacement hole can be adjusted and calibrated. It is used for building experiments in free space.

                         FWO-A1 Single Wheel Filter Wheel                          FWO-A2 Two Wheel Filter Wheel

Measurement error: Please allow a small measurement error.