DetailsNew 3.2W 4W 808nm 810nm Infrared IR Laser Diode Module Cuttingwith AC-DC power supply module for optionPower Supply Module input voltalge is 110-220VSpecificationModel 808MDWavelength 810nmOutput 3.2W/4WWorking Voltage 5VDC or 12VDC（please check the label on the module）Working Current 1.35A +-15%Working Temperature -10- 30 centi-degreeSize 33*33*80mmLens 810nmDivergence 5mradTTL >20KHzLD 808nm 4W（approx. 3.2W output） / 5W（approx. 4W output）Operating Life >5000 HoursPackage:1pc high power 808nm laser module with or without ac-dc adapterSomething buyer need to know:
- This laser module can not work for a long time if there is no cooling device to keep the laser working under 30 centi-degree.
- Please add a 5VDC power to this laser module. Red wire connects"+" pole; Black wire connects "-" pole. TTL 3-5V on, 0V off. If you don't use TTL, please just leave the blue and white wire.
- This is a focusable laser module. Please do not take off the lens adjustable part off to avoid dust.
- There is a potentiometer on the driver. You can turn it to adjust the power of the laser. Turn Clockwise to increase the laser power. Otherwise to decease the power. But the current can not surpass the current we have set up.
- Please wear 808nm laser protection goggles to protect your eyes when working on this module.
Note:The modules are tested and the output power are measured by laser power meter before sending out.Please don't compare the power of this one with a none-measured laser.If you doubt the output, please have the laser you recieved checked by laser power meter.If there is any problem, please feel free to contact us. We will solve the problem asap.It is IR laser,the laser light cannot be seen by human bare eyes with only using DDC/infrared camera get it.
808nm 4w 5W
-10 - 30 centi-degree
- Additional Information
Housing Shape No SKU c Wavelength 808nm Output >=1W