515nm-520nm Green Dot Module
$16.55 As low as: $15.30Features Low working temperature from - 15 centigrade Stable output by the green laser diode in Suitable for green laser level Used in green laser rangefinder FDA standard
Unique Color of Laser Beam, Pure Green or Light Green
Stable Performance for the laser light is directly from Laser diode not transversed from 808nm laser diode
No IR included like 532nm laser
Output stable at a much broader temperature range
Suitable for wood cutting, construction site, alignment,locating
Can be used in escap room stage lighting
laser marking locating
$20.40Operating Voltage 3V~5V Size 22 x100mm Output Power 10mw Wavelength 515 nm Radian Length 1~3m at 1m; Width <2mm at 1m Working Temperature -15 ~+35 centigrade Duty cycle without heatsink: 4-5hr Specially works for wood cutting machines.
3W White Light Laser Diode Module Laser Head light White Lighting Effect RGB Light Combining W3000-B TTL
$17.50 As low as: $8.50
Osram Laser Diode in
6*14mm mini size for gun sight
working temp, -20~~+60C which is much more better than the former 532nm gun sight.
1. Low Working Temp.
2. Escape Room
3. PM2.5 Testing
4. Stage Lighting
5. Haunted House
6. Building Landmark
7. Bird Scaring
8. Laser Harp
9. Laser Curtain
$540.00 As low as: $520.00
1. Stage Lighting
2. PM2.5 PM10 testing
Instructions for use:
1 Connect the power plug before turning on the switch. Power is applied for 10 minutes into a stable state. Switching power supply interval should be greater than 5 seconds, or easily damaged lasers.
2 power panels should be placed on an insulator or overhead when using, otherwise it will bake a bad laser power. At the same time, and not let the laser power cables suffered at great force, so as to avoid the laser internal wiring circuit.
3 This laser is normally used on stage lighting shows, so that the heatsink by itself is not suitable for 7/24 working.
4 Please note that the use of dust, the dust can not be used in place much, if not a long time in the laser light hole stickers affixed dust. 5 This laser has a switch to adjust from TTL to analog.