510nm-530nm Green Laser Module
-
$90.00Can engrave:
Wood, plastic, paper, leather
Can cut:
Paper, thin leather, thin wood plate
Cannot engrave:
Metal, glass, stone, etc
Note: the adapter only have US, EU standard. it is bonus for free. if it is not suitable, pls find a suitable one in your supermarket.
Specification
1. when you adjust the beam diameter at 20-200mm, the beam is 0.3-0.5mm. it can be used as cutting, engraving or marking on wood, paper, leather and plastic.
2. when you adjust the laser beam for fatter, it can be used as stage lighting.
3. when you use the pwm, the pulse output is 1.25w, it is suitable for engraving, marking or cutting.
4. when you use it as cw output, it is 1-1.05w output.
5. we had updated the fan cooling system on the housing which helps the laser get better heatsink effect and protect the laser longer duty cycle.
6. it is very bright so that when we use it on stage lighting, it get very good effect
-
$38.00Usage:
-
Stage lighting shows
-
Scare birds and animals
-
Laser curtain
-
Laser harp
-
Laser wine bar base
-
Escape room
-
Amusement park
-
Pleasure groud and squares
-
Holiday lighting effect
-
PM 2.5 PM 10 dust/humid testing
-
-
$83.00500mW Laser 520nm Laser Head Green Laser Module Single Green Laser
-
$4.50515nm 35mW Green Dot Laser Module with no Driver 12*15mm -
$40.00520nm 10*10 Grid Matrix Grating Green Laser Module for 3D Structural -
$249.00Out of stock
-
$40.00520nm 20*20 Rectangular Grid Green DOE Diffraction Grating Laser Module -
$540.00Features
1. Stage Lighting
2. PM2.5 PM10 testing
Instructions for use:
1 Connect the power plug before turning on the switch. Power is applied for 10 minutes into a stable state. Switching power supply interval should be greater than 5 seconds, or easily damaged lasers.
2 power panels should be placed on an insulator or overhead when using, otherwise it will bake a bad laser power. At the same time, and not let the laser power cables suffered at great force, so as to avoid the laser internal wiring circuit.
3 This laser is normally used on stage lighting shows, so that the heatsink by itself is not suitable for 7/24 working.
4 Please note that the use of dust, the dust can not be used in place much, if not a long time in the laser light hole stickers affixed dust. 5 This laser has a switch to adjust from TTL to analog.
-
$7.00520nm Green Dot Line Cross Sewing Machine Positioning Laser with USB Connection -
$9.00520nm Green Fat Beam Laser Module KTV Party Club Stage Lighting -
$35.00520nm Green Light Source DOE Grid Matrix Grating Laser Module 3D Structural Scanner Scanning -
$30.98520nm Water Resistant Green Line Generator Laser Module for Stone Woodwork Sawmill Cutting Alignment 26mm -
$3.995V 5mW 0611 Small Volume 515nm Green Dot Laser Generator Module Laserland -
$34.98DOE 450nm Blue 520nm Green 650nm Red Speckle Laser Module for AFR Face Recognition -
$8.98Fat Beam Laser Haunted House Halloween DJ Stage Lighting Curtain Escape Room Module KTV Bar Ball -
$7.98Fat Beam Laser Haunted House Halloween DJ Stage Lighting Curtain KTV Bar Ball Escape Room Module
