CXY1-M Cage Type XY Translation Adjustment Frame 30mm Cage System Frame SM1 Ø1" Two-dimensional Mount Optical Experiment

CXY1-M Cage Type XY Translation Adjustment Frame 30mm Cage System Frame SM1 Ø1" Two-dimensional Mount Optical Experiment
$132.50

Availability: In stock

CXY1-M Cage Type XY Translation Adjustment Frame 30mm Cage System Frame SM1 Ø1" Two-dimensional Mount Optical Experiment

* Required Fields

$132.50
Description

Details

Optical commonly used thread size standard

This is the unique thread of Thorlabs in the United States, not the commonly used optical thread. SM is the code for the thread of the sewing machine in terms of thread expression, but this company in the United States uses it to connect the internal and external threads of the optical lens and the sleeve. The nature of the thread is UNS, and the United States has a special thread with a tolerance accuracy of 2A / 2B. The special place of this thread is 40 teeth per inch regardless of the diameter.

The specific dimensions are as follows:

 

Parameter:

Characteristic:

►It can install Ø1" (25.4 mm) optics up to 10.0mm thick;

►Through the 3/16"-100 adjusting nut, the stroke in the X and Y directions is ±1 mm;

►Compatible with 30mm cage system;

►SM1 (1.035"-40) thread, compatible with our SM1 lens tube series products;

►The M4 screw holes on the side can be installed with post for free space;

Description:

(1) The translational adjustment frame can provide a stroke of ±1mm in the direction perpendicular to the optical axis of the 30mm cage system. This translation adjustment is driven by two 3/16"-100 fine hex adjusters. The center stage can be used for X or Y axis translation; the mounting seat has scales in the horizontal and vertical directions, which can help the installation table to be aligned. Accurate. After determining the position, the locking position of the knob lock nut can be adjusted by the 2mm hexagon wrench knob adjuster in the narrow position;

(2) The movable mounting frame also has four through holes, which can be used with PCM-S series cage post. Each post is fixed by tightening the fastening screw on the side with a 1.3 mm hex wrench;

(3) Drawing display.

(4) The movable mounting table has SM1 (1.035"-40) threads, and the attached SM1 snap ring can be used to directly mount Ø1" optics up to 10 mm thick;

(5) There is an M4 threaded hole on both sides, which can be installed with Ø12mm post or Ø1" post for free space construction.

 

 Measurement error: Please allow a small measurement error.

Additional Information

Additional Information

SKU CXY1-M
Reviews

Product Tags

Use spaces to separate tags. Use single quotes (') for phrases.