Product informationProduct nameSnap-in Mounting BracketsModelCSK-30Specification40.6* 14.0*10.5mmEntrance Aperture30mm cage systemThread TypeØ 4.2mm SpigotWeight10.0gProduct nameSnap-in Mounting BracketsModelCSK-A70Specification71. 5*14.0*14.0mmEntrance Aperture60mm cage systemThread TypeØ 6.2*36.0mm CountersunkWeight20.2gCharacteristic▶For supporting cage assemblies with posts;
▶ Compatible with 30mm or 60mm cage system;
▶Snap-in design, easy to install or remove;
▶Through the flexible slot locking design, it can be firmly locked on the 06mm cage rod;
▶Mount the post with M4 screws through the countersunk hole/slot;These cage mount brackets feature a snap-in design for post mounting in 30mm/60mm cage systems. The flexible design snaps into two 06mm cage rods for easy installation or removal without removing the cage system. Slide the bracket into place and tighten the set screw on the side of the bracket to lock the position.The cage mounting bracket has a hole and slot in the middle for installing the post. The CSK-30 has a 04.2mm countersunk hole and is installed on the post using M4 stud screws. The CSK-A70 has a 06.2mm, 36.0mm long countersunk groove, which can be installed off-axis, and the adjustment range is ±18.0mm. Mounts to the post using M6 stud screws, allowing the post axis to be offset for cage rod installation.
Measurement error: Please allow a small measurement error.
- Additional Information