CSK-A30 Cage System Clamping Mounting Support Frame Stainless Steel Post Rod Cage Clamp for Optical Experiment Research

Product information

Characteristic

▶ Quick-connect clamp mounting bracket for 30mm and 60mm cage systems;

▶ Clamping bracket can be easily inserted and removed from the cage system;

▶ A single locking screw on the clamp can quickly and easily lock the cage assembly;

▶ It can be mounted on a 25mm post with a post holder;

▶ Cage system can be set up quickly and stably;

Clip-on mounting brackets are used for 30mm and 60mm cage systems, respectively. Two parallel cage rods are inserted into the mounting bracket and secured by a single screw. One post can support the entire cage system. A 3 / 16-inch (5mm) ball driver can be used to tighten the highly stable flexible locking mechanism, thereby securing the mounting bracket to a (Ø25mm) post. If a cage post clamp is needed, it can be photographed separately.

This is a kit device with a quick-release handle for quick adjustment of the clip-on mounting bracket.

The removal handle is used to secure the clip to the post. The length of the handle is 2.36 inches (60mm), including a total of 1/4 ''-20 (M6) bolts, which can be directly rotated to install the handle, shortening the time required for basic setup and alignment in order to adjust the clip-on mounting bracket.

▶ The size of the 30mm clamp mounting bracket is 46 * 35mm;

▶ The specification of the 60mm clamp mounting bracket is 76 * 35mm;

The threaded bar and spring drive are used to achieve a fast and convenient fixing method.

Application scenario display

We supply a wide range of optics to create an easy-to-build experimental platform in an optical system.

 Measurement error: Please allow a small measurement error.