▶Compatible with CSL60-M2 cage cube, allowing SM2 threaded components to be connected to the top or bottom of the cube;
▶With the sleeve shielding component, SM2 to SM1 threaded sleeve conversion can be achieved;
▶With a cage dust cover, it can provide a dark environment;
▶The conversion cover has Ø6mm through holes for cage rods;
▶The 3mm fastening screw on the side locks the fixed position of the cage rod;
▶With SM2 (2.035"-40) internal thread;
▶Compatible with 60mm cage system;
CSJ-T2 is a SM2 threaded cage cube cover plate, used with CSL60-M2 cage cube, which is connected to the countersunk hole on the cover plate by 4 M4 cap head screws; it can be fixed by CSL-P2 cage type The dust cover provides a dark environment inside the cube.
With SM2 (2.035"-40) internal thread; allows SM2 threaded components to be connected to the top or bottom surface of the cube. It can also be used with CSM2-1 bushing shielding components to provide SM2 to SM1 bushing conversion.
The two sides are machined with 4 Ø6mm through holes for M6 pole installation. The through hole design allows the end plate to move along the cage rod, and then use the included M3 fastening screw to lock firmly and screw the cage rod on Compatible with cage structure on the cube;
Measurement error: Please allow a small measurement error.
- Additional Information