CSJ-25 Cage Plate Mounting Frame 30mm Cage System Standard Cage Plate Optics Mounting Frame Cage System Optical Experiment

Product information

Model:CSJ-25

Product name:30mm cage plate frame

Specification:41*41*9mm

Mounting holes:Ø25.4mm

M6 through hole:30mm pitch

Screw hole:M4

Material:#7075 Aluminum alloy

Net weight:24g

Characteristic

▶ CSJ-25 cage plate frame can be installed with Ø1 inch (25.4mm) or 25mm optical components

▶ Optical components can be installed directly in the 30mm cage system;

▶ The limit hole installation area provides stable two-line contact for optical components;

▶ Use the bottom M4 threaded mounting hole to install on the stainless steel post;

▶ Fixed element through top nylon top wire;

A: The nylon top wire can stably fix the optical lens; the limit hole provides stable two-line contact for the optical element according to the area.

B: M4 threaded hole at the bottom can be used to install stainless steel posts to build different optomechanical components in combination; a Ø1 inch Teflon washer is included. If additional washers are required, they need to be purchased separately.

C: The M6 through hole is compatible with Ø6mm cage rods; the fixing screws on the side cage rods are 2mm, which can stabilize the cage rods.

Measurement error: Please allow a small measurement error.