Product name:30mm segment cage plate
M6 through hole:30mm pitch
Material:#7075 Aluminum alloy
How to use the segment cage plate:
Use the CSH-M1 segment cage plate to construct a removable cage segment connection. Pass the two cage rods completely through the through holes on the cage plate, and use a 0.050 inch (1.5 mm) hex wrench to tighten the 4-40 screws on the side. Clamp the cage rod with a flexible device. Use an appropriate hex wrench to tighten the screws to lock all flexible devices.
Please note that the cage rod of the removable cage segment should be of sufficient length so that it can be placed in the flexible clamp of the external CSH-M1 cage plate.
▶CSH-M1 segment cage plate is used to build a detachable cage segment;
▶M6 through hole is compatible with Ø6mm stainless steel cage rod;
▶Flexible cam lock design, easy to quickly disassemble the cage section;
▶SM1 (1.035"-40) internal thread is compatible with SM1 threaded sleeve;
▶With two CSK3 standard snap rings;
A: Pass the two cage rods completely through the M6 through holes on the cage plate, and fix them with M3 fastening screws on the side.
B: Flexible cam lock design, easy to quickly disassemble the cage section. If the cage rod needs to be fixed in place after it is inserted into the cage, use a hexagon wrench to tighten the M3 stud screws on the side to lock all flexible devices.
C: SM1 thread is compatible with SM1 lens tube, the top/bottom 4mm threaded hole can be used to install stainless steel post (2 CSK3 standard SM1 snap rings are included, if you need more snap rings, please purchase separately).
Measurement error: Please allow a small measurement error.
- Additional Information