Product name:Snap-in Cage Plate
Mounting holes:Compatible with Ø1 inch (25.4mm)
▶CSD-M1 snap-in cage plate can install Ø1 inch optical lens;
▶The cage plate with flexible lock can be fixed to the M6 cage rod stably;
▶The installation method adopts diagonal installation instead of adjacent cage rods;
▶ Comes with 2mm cap screws, use a hex wrench to tighten the cap screws in the flexible fixture;
▶Two nylon top wires on the top surface can play three points to fix the optical element;
▶With Teflon washer;
A: The mounting holes are compatible with Ø1" (25.4mm) optical lenses with a maximum thickness of 6mm. The optical lenses can be stably locked and fixed using a 2.0mm hexagon wrench nylon top wire. (This product comes with a DS1 Teflon washer, if you need more washer, please purchase separately).
B: The flexible clamp can be held stably and fixed to the cage rod. The 1.5mm hex wrench can be used to quickly tighten the cap screw in the flexible fixture.
Measurement error: Please allow a small measurement error.
- Additional Information