▶We provide different post lengths of φ0.5 inch (12.7 mm) ~ φ4 inch (101.6mm);
▶Can be stacked through M4/M6 threaded holes, and the heightened base is compatible with M-BASE-C fork clamp;
▶Use the M6 to M4 male to male adapter screw, or the male to female M6 to M4, and use it with conversion;
▶Solid stainless steel structure, surface polishing and grinding treatment;
The one-piece, solid non-magnetic stainless steel base post has excellent strength and rigidity. We offer two versions with M4/M6 threaded holes at both ends. There is a wide groove around the threaded hole to help clamp on our optical mount and optical table. The base post can be selected from various heights between 0.5 ~ 4 inches (12.7 mm ~ 101.6 mm). A post can be added to the top of the standard base post to increase the height.
The base of the post is compatible with our solid stainless steel fork clamp to flexibly fix the post assembly to the optical table. We also provide post spacers to improve the flexibility of vertical positioning, and can also be stacked on the base post to obtain other intermediate lengths.
C :The one-piece, solid non-magnetic stainless steel base post has excellent strength and rigidity. The threaded holes at both ends are M4/M6, and the adapter screw can be used to turn male to M6 to M4 or male to female to M6 to M4;
D :There is a 6mm/4mm through hole in the center of the 1-inch diameter support rod. If it needs to be directly installed on the optical table, it can be tightened with tools.
Different lengths can be selected for the base type post: 0.5 ~ 4 inches (12.7mm ~ 101.6 mm) of different lengths.
We supply a wide range of optics to create an easy-to-build experimental platform in an optical system.
Measurement error: Please allow a small measurement error.
- Additional Information