▶ CFP-A25 Post clamp block adopts metric specifications;
▶ The post hole diameter is 25mm, compatible with 25mm diameter stainless steel post support rods;
▶ The connection table has multiple M4 / M6 threaded holes arranged in different specifications, which can be used to install different optical-mechanical components;
▶ The back clamping device can realize stable vertical positioning;
▶ Each clamp block is equipped with M6 cap screws. If you need a quick-release handle, it can be photographed separately, which can be quickly and easily tightened and removed;
Multiple combination installation
CSK-A30 Clamping Mount schematic diagram
For (Ø25mm) Posts, Clamping Mounts for 30mm and 60mm Cage Systems, respectively. Two parallel cage rods are inserted into the mounting bracket and secured by a single screw. One post can support the entire cage system. A 3/16 inch (5mm) ball driver can be used to compress the highly stable flexible locking mechanism, thereby fixing the mounting bracket to a (25mm) post. If a clip-on mounting bracket is required, it can be photographed separately.
Quick-release handle for quick and repeatable post clamping
The quick-release handle is used to secure the clip to the post. The handle is 2.36 inches (60mm) in length and contains a total of 1/4 ''-20 (M6) bolts. The internal ratchet drive mechanism prevents the handle from driving the bolts during the retraction position. It can be installed by rotating the handle directly, which can better control the required torque when tightening and loosening the clamping block. Reduces the time required for basic setup and alignment to quickly secure the clamps.
OPS-M406 Conversion Board
The post clamp block installs a metric front panel with many (M6 / M4) regularly arranged threaded holes and countersunk holes. This combination of clamp block and panel can be used to install many different opto-mechanical components.
Application scenario display
We supply a wide range of optics to create an easy-to-build experimental platform in an optical system.
Measurement error: Please allow a small measurement error.
- Additional Information