►Solid stainless steel construction;
►Compatible with CFJP-S series post, transform it into a base post;
►3-point contact type tightening screw, flexible clamping mechanism, significantly improve clamping stability;
►There is a counterbore on the bottom surface, and the contact line with the platform provides a more stable holding force;
(1) The base is made of solid 304 stainless steel, which is used to install the CFJP-S series Ø25mm post to the base and transform it into a base post. Using the M6 set screw on the side to drive the flexible clamping mechanism, the post can be rotated 360°.
In terms of height adjustment, the hollow base allows the post to directly contact the surface of the optical table, maximizing the height adjustment of the post.
(2) Compared with the fork clamp, the contact surface between the CFJP-B-S post base and the platform is larger, and its parallelism and perpendicularity processing tolerances are within ±0.05mm, which can provide better stability. And there are 4 countersunk mounting holes on the bottom surface. After the positioning is completed, use the attached M6 column head screws to tighten and fix it to the optical table or breadboard.
(3) On a relatively narrow optical platform, the base can be used to carry a small platform twice. Due to its solid structural quality, the installation stability is enhanced, and the load-bearing gravity is better. In order to make full use of the space on the optical breadboard.
Measurement error: Please allow a small measurement error.
- Additional Information