Search results for 'blue laser'
-
$3.9906*10 780nm 1mW Infrared Diode Laser Module Diameter 5V TTL 10kHz 8mm -
-
$59.98Specification
1. Stage Lighting
2. Building Location
3. Laser Curtain
4. Bird Scaring
5. Beam Diameter: 15mm
-
$18.00green laser diode drive
1. laser point
2. for Jewelry Testing, we had checked
Jade and Brazil tourmaline Crack testing
Diamond, Ruby and saphire cutting surface testing
-
$14.00 -
$110.00450nm 5.5w Engraving Marking Engraver/Marker for wood/plastic/stainless steel
-
$14.98980nm IR Infrared 5mW Laser Pointer Pen Currency Detector Anti-Fake Class 3R
-
$18.00Function:
-
laser curtain
-
escape room
-
stage lighting
-
ktv
-
wine base
-
laser harp
-
laser landmark
-
high-way warning light
-
-
$15.001030 635nm 10mw Red Laser Dot Module for Locating Punching Bench Drilling Machine -
$540.00Features
1. Stage Lighting
2. PM2.5 PM10 testing
Instructions for use:
1 Connect the power plug before turning on the switch. Power is applied for 10 minutes into a stable state. Switching power supply interval should be greater than 5 seconds, or easily damaged lasers.
2 power panels should be placed on an insulator or overhead when using, otherwise it will bake a bad laser power. At the same time, and not let the laser power cables suffered at great force, so as to avoid the laser internal wiring circuit.
3 This laser is normally used on stage lighting shows, so that the heatsink by itself is not suitable for 7/24 working.
4 Please note that the use of dust, the dust can not be used in place much, if not a long time in the laser light hole stickers affixed dust. 5 This laser has a switch to adjust from TTL to analog.
-
$38.00Usage:
-
Stage lighting shows
-
Scare birds and animals
-
Laser curtain
-
Laser harp
-
Laser wine bar base
-
Escape room
-
Amusement park
-
Pleasure groud and squares
-
Holiday lighting effect
-
PM 2.5 PM 10 dust/humid testing
-
-
-
$490.00Features This Laserland RGB laser is normally used on mini stage lighting for Halloween, Christmas. This Laserland RGB white laser can be used in escape room lighting effect. one laser can be used for 6 colors for lighting shows. This laserland RGB white laser can be used in KTY and DJ bars for Parties or Bars. Hunted House use for Fun Instructions for use: 1 Connect the power plug before turning on the switch. Power is applied for 10 minutes into a stable state. Switching power supply interval should be greater than 5 seconds, or easily damaged lasers. 2 power panels should be placed on an insulator or overhead when using, otherwise it will bake a bad laser power. At the same time, and not let the laser power cables suffered at great force, so as to avoid the laser internal wiring circuit. 3 This laser is normally used on stage lighting shows, so that the heatsink by itself is not suitable for 7/24 working. 4 Please note that the use of dust, the dust can not be used in place much, if not a long time in the laser light hole stickers affixed dust. 5 This laser has a switch to adjust from TTL to analog. -
-
$15.0016*120mm 405nm 20mW 50mW 100mW 150mW 200mW Rectanble Dot Laser Module -
