Search results for 'blue laser'
-
$8.9916mm Laser Beam Collimating Glass Focal Lens Plano-covex
-
$14.80980nm 500mw 5.6mm Laser Diode SLD980500TH-A
-
$17.9816*68 638nm Orange Red Cross Hair Laser Module Sharp Laser Diode In
comparing with 650nm at the same output, the 638nm is more brighter
as single mode laser diode is, the line effect is clear and stable.
-
$375.00
Specification
Wavelength: 905nm
Output: 25w
It is IR laser,the laser light cannot be seen by human bare eyes with only using DDC/infrared camera get it.
-
-
$11.85 As low as: $9.40Out of stock
Product Description
Main Features:
Diameter: 5.6 mm TO18
Life-Span: > 6000 hours
Wavelength: 405nm
Output: CW 150mw
Voltage: 4.5-5V DC
Current: < 240mA
Package: 1pc
Note:
1. Before carrying on some laser DIY activities, please read about the technical information first and protect your eyes before laser ray.
2. Be sure the operator has experience in optics DIY or testing.
3. Don't operate when the power is connected.
4. only for professionals.
5. duty cycle without heatsink: 5 seconds on, 1 seconds off.
6. working life: testing life with heatsink.
7. warranty: no warranty because laser diode is consuming material.
8. datasheet: you can google a datasheet or contact me for it.
9. if buyer use it for longer time without heatsink, we do not take any responsibility.
-
$15.001030 635nm 10mw Red Laser Dot Module for Locating Punching Bench Drilling Machine -
$17.9816*68 638nm Orange Red Line Laser Module -
-
-
-
-
$29.98Specification:
1. -10~+35 centigrade
2. Dust/water-proof cover which will protect the laser when it cuts stones or woods.
4. Bigger housing for longer duty cycle.
5. 12VDC adapter for more stable power supply -
-
$540.00Features
1. Stage Lighting
2. PM2.5 PM10 testing
Instructions for use:
1 Connect the power plug before turning on the switch. Power is applied for 10 minutes into a stable state. Switching power supply interval should be greater than 5 seconds, or easily damaged lasers.
2 power panels should be placed on an insulator or overhead when using, otherwise it will bake a bad laser power. At the same time, and not let the laser power cables suffered at great force, so as to avoid the laser internal wiring circuit.
3 This laser is normally used on stage lighting shows, so that the heatsink by itself is not suitable for 7/24 working.
4 Please note that the use of dust, the dust can not be used in place much, if not a long time in the laser light hole stickers affixed dust. 5 This laser has a switch to adjust from TTL to analog.
-
$57.98 As low as: $30.00more details pls check the datasheet in the tital picture
original packaged with newly data
