Search results for 'blue laser'
-
$36.48520nm 100mw Green Laser dot Module Diode Stage Lighting Long Duty 12VDC TTL -
$8.90Stage Lighting 650nm 5mw 100mW Red Laser Module no Driver 18*25mm -
$20.39TEM Stage Lighting 650nm 150mW Red + 515nm 50mw Green Laser Module Diode TTL 12V -
$17.36520nm 30mw Green Dot Laser Module Diode DC/AC 12V Stage Lighting TTL 0-5V -
$20.95Stage Lighting 650nm 100mW Red + 515nm 30mw Green Laser Module Diode TTL TEM -
$18.18Stage Lighting 650nm 80mW Red + 532nm 20mw Green Laser Module Diode TTL -
$15.00 As low as: $14.00Out of stock
3VDC 532nm Green Laser 5mw-10mw DOT Module Diode Lazer for Laser Scope -
-
-
$13.683.0-3.7V 50mW 150-200mw 532nm Green Beam Laser Module -
$15.0016*120mm 405nm 20mW 50mW 100mW 150mW 200mW Rectanble Dot Laser Module -
-
$490.00Features This Laserland RGB laser is normally used on mini stage lighting for Halloween, Christmas. This Laserland RGB white laser can be used in escape room lighting effect. one laser can be used for 6 colors for lighting shows. This laserland RGB white laser can be used in KTY and DJ bars for Parties or Bars. Hunted House use for Fun Instructions for use: 1 Connect the power plug before turning on the switch. Power is applied for 10 minutes into a stable state. Switching power supply interval should be greater than 5 seconds, or easily damaged lasers. 2 power panels should be placed on an insulator or overhead when using, otherwise it will bake a bad laser power. At the same time, and not let the laser power cables suffered at great force, so as to avoid the laser internal wiring circuit. 3 This laser is normally used on stage lighting shows, so that the heatsink by itself is not suitable for 7/24 working. 4 Please note that the use of dust, the dust can not be used in place much, if not a long time in the laser light hole stickers affixed dust. 5 This laser has a switch to adjust from TTL to analog. -
-
$38.00Usage:
-
Stage lighting shows
-
Scare birds and animals
-
Laser curtain
-
Laser harp
-
Laser wine bar base
-
Escape room
-
Amusement park
-
Pleasure groud and squares
-
Holiday lighting effect
-
PM 2.5 PM 10 dust/humid testing
-
-
$540.00Features
1. Stage Lighting
2. PM2.5 PM10 testing
Instructions for use:
1 Connect the power plug before turning on the switch. Power is applied for 10 minutes into a stable state. Switching power supply interval should be greater than 5 seconds, or easily damaged lasers.
2 power panels should be placed on an insulator or overhead when using, otherwise it will bake a bad laser power. At the same time, and not let the laser power cables suffered at great force, so as to avoid the laser internal wiring circuit.
3 This laser is normally used on stage lighting shows, so that the heatsink by itself is not suitable for 7/24 working.
4 Please note that the use of dust, the dust can not be used in place much, if not a long time in the laser light hole stickers affixed dust. 5 This laser has a switch to adjust from TTL to analog.
