Search results for 'blue laser'

Focusable 520nm 5mW Green Line Focusable Laser Module Osram LD in 5VDC

Feature:
Unique Color of Laser Beam, Pure Green or Light Green
Stable Performance for the laser light is directly from Laser diode not transversed from 808nm laser diode
No IR included like 532nm laser
Output stable at a much broader temperature range
Suitable for wood cutting, construction site, alignment,locating
Can be used in escap room stage lighting

Features Low working temperature from - 15 centigrade Stable output by the green laser diode in Suitable for green laser level Used in green laser rangefinder FDA standard

22*100  515nm 10mw Green Laser Dot Module for Cutting Engraving Machines 

Pecifications:

Escape Room

Haunted House

Bird Scare

Laser Harp

Laser Marking Locating

Laser Pointing

Laser Indicating

Specification:
1. Low Temperature turns on. This laser can work in winter for temperature at -25 centigrade
2. High temperature working: this laser can work on summer when the working temperature is over 40 centigrade. 
3. Dust/water-proof cover which will protect the laser when it cuts stones or woods. 
4. Bigger housing for longer duty cycle.
5. 12VDC adapter for more stable power supply

Comparing with 532nm laser modules, this one is better at those areas:
1. wider working temperatuer from -25~45 centigrade
2. stable wavelength, no red bomb. 
3. working in more seriously conditions.

520nm 100mw Green Laser dot Module Diode Stage Lighting Long Duty 12VDC TTL

520nm 30mw Green Dot Laser Module Diode DC/AC 12V Stage Lighting TTL 0-5V

specifications:

escape room

haunted house

bird scare

laser swamp

laser cutting machine locating

specifications:

Cloth/leather cutting locating

Laser sew locating

Usage:

1. Stage lighting shows

2. Scare birds and animals

3. Laser curtain

4. Laser harp

5. Laser wine bar base

6. Escape room

7. Amusement park

8. Pleasure groud and squares

9. Holiday lighting effect

10. PM 2.5 PM 10 dust/humid testing

Features

1. Stage Lighting

2. PM2.5 PM10 testing

Instructions for use:

1 Connect the power plug before turning on the switch. Power is applied for 10 minutes into a stable state. Switching power supply interval should be greater than 5 seconds, or easily damaged lasers.

2 power panels should be placed on an insulator or overhead when using, otherwise it will bake a bad laser power. At the same time, and not let the laser power cables suffered at great force, so as to avoid the laser internal wiring circuit.

3 This laser is normally used on stage lighting shows, so that the heatsink by itself is not suitable for 7/24 working.

4 Please note that the use of dust, the dust can not be used in place much, if not a long time in the laser light hole stickers affixed dust. 5 This laser has a switch to adjust from TTL to analog.

Diode Laser

Diode Laser

Focusable 12*55 powell lens 110 degree Green 510nm 10mw Laser Line Module for Machine Vision use