Laser Module
-
$25.98 As low as: $17.00Water Resistant Red Green Line Generator Laser Module for Wood Metal Stone Cutting Locator -
$1.50Red Green Laser Head Diode Module Dot Line Cross Generator for Marking Positioning -
$39.99This laser adopts an imported 520nm green laser diode, that a green laser diode directly emits light. The non-808nm laser diode is converted into a 532nm green laser by a crystal. It can start and work at low temperature. The laser has a pure color and a long continuous working time, suitable for industrial and stage lighting scenes.
-
$39.98Green Dot Matrix Laser Module
-
$69.98Out of stock
Focusable 12*55 powell lens 110 degree Green 510nm 10mw Laser Line Module for Machine Vision use -
$7.98Fat Beam Laser Haunted House Halloween DJ Stage Lighting Curtain KTV Bar Ball Escape Room Module -
$8.98Fat Beam Laser Haunted House Halloween DJ Stage Lighting Curtain Escape Room Module KTV Bar Ball -
$34.98DOE 450nm Blue 520nm Green 650nm Red Speckle Laser Module for AFR Face Recognition -
$3.995V 5mW 0611 Small Volume 515nm Green Dot Laser Generator Module Laserland -
$30.98520nm Water Resistant Green Line Generator Laser Module for Stone Woodwork Sawmill Cutting Alignment 26mm -
$35.00520nm Green Light Source DOE Grid Matrix Grating Laser Module 3D Structural Scanner Scanning -
$9.00520nm Green Fat Beam Laser Module KTV Party Club Stage Lighting -
$7.00520nm Green Dot Line Cross Sewing Machine Positioning Laser with USB Connection -
$540.00Features
1. Stage Lighting
2. PM2.5 PM10 testing
Instructions for use:
1 Connect the power plug before turning on the switch. Power is applied for 10 minutes into a stable state. Switching power supply interval should be greater than 5 seconds, or easily damaged lasers.
2 power panels should be placed on an insulator or overhead when using, otherwise it will bake a bad laser power. At the same time, and not let the laser power cables suffered at great force, so as to avoid the laser internal wiring circuit.
3 This laser is normally used on stage lighting shows, so that the heatsink by itself is not suitable for 7/24 working.
4 Please note that the use of dust, the dust can not be used in place much, if not a long time in the laser light hole stickers affixed dust. 5 This laser has a switch to adjust from TTL to analog.
-
$40.00520nm 20*20 Rectangular Grid Green DOE Diffraction Grating Laser Module -
$249.00Out of stock
