Laser Module
-
$249.00Out of stock
-
$18.00Out of stock
Features
1.specially used for emboidery machine
2.5 degree cross hair can also be used on sewing maching and marking machines
3.texitile Machine use
4.needle craft use
-
$540.00Features
1. Stage Lighting
2. PM2.5 PM10 testing
Instructions for use:
1 Connect the power plug before turning on the switch. Power is applied for 10 minutes into a stable state. Switching power supply interval should be greater than 5 seconds, or easily damaged lasers.
2 power panels should be placed on an insulator or overhead when using, otherwise it will bake a bad laser power. At the same time, and not let the laser power cables suffered at great force, so as to avoid the laser internal wiring circuit.
3 This laser is normally used on stage lighting shows, so that the heatsink by itself is not suitable for 7/24 working.
4 Please note that the use of dust, the dust can not be used in place much, if not a long time in the laser light hole stickers affixed dust. 5 This laser has a switch to adjust from TTL to analog.
-
$38.00Usage:
-
Stage lighting shows
-
Scare birds and animals
-
Laser curtain
-
Laser harp
-
Laser wine bar base
-
Escape room
-
Amusement park
-
Pleasure groud and squares
-
Holiday lighting effect
-
PM 2.5 PM 10 dust/humid testing
-
-
$14.00 -
$14.98specifications:
escape room
haunted house
bird scare
laser swamp
laser cutting machine locating
-
$24.98450nm 80mW Blue Laser Dot Module Haunted House Lighting effects Escape Room -
-
$52.98 As low as: $46.00Focusable 1W 445nm Blue Laser Diode Module for Engraving Cutting Marking machines -
$490.00Features This Laserland RGB laser is normally used on mini stage lighting for Halloween, Christmas. This Laserland RGB white laser can be used in escape room lighting effect. one laser can be used for 6 colors for lighting shows. This laserland RGB white laser can be used in KTY and DJ bars for Parties or Bars. Hunted House use for Fun Instructions for use: 1 Connect the power plug before turning on the switch. Power is applied for 10 minutes into a stable state. Switching power supply interval should be greater than 5 seconds, or easily damaged lasers. 2 power panels should be placed on an insulator or overhead when using, otherwise it will bake a bad laser power. At the same time, and not let the laser power cables suffered at great force, so as to avoid the laser internal wiring circuit. 3 This laser is normally used on stage lighting shows, so that the heatsink by itself is not suitable for 7/24 working. 4 Please note that the use of dust, the dust can not be used in place much, if not a long time in the laser light hole stickers affixed dust. 5 This laser has a switch to adjust from TTL to analog. -
$27.5812VDC 405nm 120mw 150mw 200mw 300mw Blue Violet Laser Diode Module with 0-20KHz TTL modulation -
-
-
-
$17.9816*68 638nm Orange Red Line Laser Module -
$15.001030 635nm 10mw Red Laser Dot Module for Locating Punching Bench Drilling Machine
