Note: The product need prepared for 3~5 days, if you think it is too long, please donot buy it. Thank you for your cooperation.
Model: RGB2W lasers
Laser: 638nm 500mW
Optical output power:> 2000mW
Export spot: <3 * 3mm
Divergence angle: <2mrad
Continuous light minimum voltage: 0.9 ~ 1.1V
Continuous maximum power voltage: 5V
Operating temperature: 0 ~ 40 ℃
Laser Size: 80 (L) X40 (W) X40 (H)
Leave me message for ttl or analog you prefer. or we sent at random
Instructions for use:
1 Connect the power plug before turning on the switch. Power is applied for 10 minutes into a stable state. Switching power supply interval should be greater than 5 seconds, or easily damaged lasers.
2 power panels should be placed on an insulator or overhead when using, otherwise it will bake a bad laser power. At the same time, and not let the laser power cables suffered at great force, so as to avoid the laser internal wiring circuit.
3 To make the laser heat well, move the laser fixed on a flat metal plate.
4 Please note that the use of dust, the dust can not be used in place much, if not a long time in the laser light hole stickers affixed dust.