Note: The product need prepared for 10~20 days, if you think it is too long, please donot buy it. Thank you for your cooperation.
Output wavelength: 450nm
Output Power: 1000mW
Idemitsu Height: 20mm
Light beam diameter: <3mm
Divergence angle: <1mrad
Operating temperature: 0 ~ 40 ℃
Input voltage: AC85 ~ 240V
Refrigeration: TEC Cooling
Modulation: TTL level
Laser Size: 92 (L) X40 (W) X40 (H)
Laser power supply Dimensions: 102 (L) X46 (W) X43 (H)Instructions for use:1 Connect the power plug before turning on the switch. Power is applied for 10 minutes into a stable state. Switching power supply interval should be greater than 5 seconds, or easily damaged lasers.2 power panels should be placed on an insulator or overhead when using, otherwise it will bake a bad laser power. At the same time, and not let the laser power cables suffered at great force, so as to avoid the laser internal wiring circuit.3 To make the laser heat well, move the laser fixed on a flat metal plate.4 Please note that the use of dust, the dust can not be used in place much, if not a long time in the laser light hole stickers affixed dust.
- Additional Information
Housing Shape Cube SKU 11040026 Wavelength 445nm 450nm Output >=1W